DAXING MOTOR
Russian
YKK high voltage asynchronous electric motors

YKK / General industrial electric motors

YKK high voltage asynchronous electric motors

High-voltage three-phase asynchronous motors YKK 6KV (sizes 355–800) and YKK 10KV (sizes 450–800) have class F insulation, rated frequency 50HZ and continuous operating mode S1.

Voltage
6KV/10KV
Isolation
F
Degree of protection
IP44/IP54
Cooling
IC611/IC616
Operating mode
S1

High-voltage three-phase asynchronous motors YKK 6KV (sizes 355–800) and YKK 10KV (sizes 450–800) have class F insulation, rated frequency 50HZ and continuous operating mode S1. Degree of protection - IP44 or IP54. Cooling method is IC611, with top air-to-air heat exchanger. Mounting design - IMB3 (horizontal, on feet). For two-pole motors of size 630 and above, the heat exchanger is equipped with a fan, the cooling method is IC616.

The maximum ambient temperature varies by season, but does not exceed 40℃.

Altitude above sea level - no more than 1000m.

Minimum ambient temperature: −15℃ for motors with rolling bearings and 0℃ for motors with plain bearings.

The average monthly maximum relative humidity of the most humid month is 90%; Moreover, the average monthly minimum temperature of this month does not exceed 25℃.

When the engine is running, the permissible deviation of the rated voltage is ±5%, the rated frequency is ±1%.

Overall and installation dimensions

YKK technical drawing
Overall and installation dimensions
Dimensions Number of poles Mounting dimensions (mm) Dimensions (mm)
A B C D E F G H K A.A. A.C. AB B.A. BB BD HD HB L
355 2 630 900 315 80 +0.030
+0.011		 170 22 71 355 28 160 994 800 540 1380 200 99 99 2150
355 4-6 630 900 315 100 +0.035
+0.013		 210 28 90 355 28 160 994 800 540 1380 200 99 99 2150
400 2 710 1000 375 90 170 25 81 400 35 210 1094 900 610 1520 230 109 109 2290
400 4-8 710 1000 335 110 210 28 100 400 35 210 1094 900 610 1520 230 109 109 2290
450 2 800 1120 400 100 210 28 90 450 35 210 1174 980 680 1640 230 149 149 2430
450 4 800 1120 355 120 210 32 109 450 35 210 1174 980 680 1640 230 149 149 2385
450 6-12 800 1120 355 130 +0.040
+0.015		 250 32 119 450 35 210 1174 980 680 1640 230 149 149 2425
500 2 900 1250 560 110 +0.035
+0.013		 210 28 100 500 42 210 1314 1120 720 1750 305 309 309 2630
500 4 900 1250 475 130 +0.040
+0.015		 250 32 119 500 42 210 1314 1120 720 1750 305 309 309 2600
500 6-12 900 1250 475 140 250 36 128 500 42 210 1314 1120 720 1750 305 309 309 2600
560 2 1000 1400 560 130 250 32 119 560 42 210 1410 1220 710 1880 340 387 387 2780
560 4 1000 1400 500 150 250 36 138 560 42 210 1410 1220 710 1880 340 387 387 2780
560 6-12 1000 1400 500 160 300 40 147 560 42 210 1410 1220 710 1880 340 387 387 2780
630 2 1120 1600 560 140 250 36 128 630 48 210 1620 1360 715 2020 300 507 507 3040
630 4 1120 1600 530 170 300 40 157 630 48 210 1620 1360 715 2020 300 507 507 2975
630 6-12 1120 1600 530 180 300 45 165 630 48 210 1620 1360 715 2020 300 507 507 2975
710 2 1400 1800 530 160 300 40 147 710 56 240 1860 1600 935 2270 235 507 507 3490
710 4-16 1400 1800 530 200 +0.046
+0.017		 350 45 185 710 56 240 1860 600 935 2270 235 507 507 3550
800 2 1600 2000 530 180 +0.040
+0.015		 300 45 165 800 56 250 2110 850 935 2520 260 605 605 3850
800 4-16 1600 2000 530 220 +0.046
+0.017		 350 50 203 800 56 250 2110 1850 935 2520 260 605 605 3900

Note: YKK560-2, YKK630-2, YKK710-2 and YKK800 motors are equipped with plain bearings.

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency EFFη(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK3551-2 220 2975 26.9 92.5 0.85 0.6 7.0 1.8 2470
YKK3552-2 250 2975 30.6 92.6 0.85 0.6 7.0 1.8 2700
YKK3553-2 280 2975 34.2 92.8 0.85 0.6 7.0 1.8 2730
YKK3554-2 315 2975 38.3 93.1 0.85 0.6 7.0 1.8 2750
YKK3551-4 185 1485 22.6 92.8 0.85 0.7 6.5 1.8 2280
YKK3552-4 200 1485 24.4 92.9 0.85 0.7 6.5 1.8 2325
YKK3553-4 220 1485 26.8 93.0 0.85 0.7 6.5 1.8 2390
YKK3554-4 250 1485 30.4 93.1 0.85 0.7 6.5 1.8 2450
YKK4002-2 355 2975 42.5 93.4 0.86 0.6 7.0 1.8 3540
YKK400₃-2 400 2975 47.8 93.7 0.86 0.6 7.0 1.8 3570
YKK4004-2 450 2975 53.6 94.0 0.86 0.6 7.0 1.8 3590
YKK4005-2 500 2975 59.4 94.2 0.86 0.6 7.0 1.8 3620
YKK4002-4 280 1485 33.6 93.2 0.86 0.7 6.5 1.8 3780
YKK4003-4 315 1485 37.8 93.3 0.86 0.7 6.5 1.8 3845
YKK4004-4 355 1485 42.5 93.5 0.86 0.7 6.5 1.8 3925
YKK4005-4 400 1485 47.8 93.7 0.86 0.7 6.5 1.8 4050
YKK4006-4 450 1485 53.6 93.9 0.86 0.7 6.5 1.8 4160
YKK4001-6 185 990 23.5 92.4 0.82 0.7 6.0 1.8 2470
YKK4002-6 200 990 25.3 92.6 0.82 0.7 6.0 1.8 2520
YKK4003-6 220 990 27.8 92.8 0.82 0.7 6.0 1.8 3860
YKK4004-6 250 990 31.5 93.0 0.82 0.7 6.0 1.8 3900
YKK4005-6 280 990 35.2 93.3 0.82 0.7 6.0 1.8 3950
YKK4006-6 315 990 39.5 93.5 0.82 0.7 6.0 1.8 4060
YKK4004-8 185 740 24.7 92.5 0.78 0.8 5.5 1.8 3830
YKK4005-8 200 740 26.6 92.7 0.78 0.8 5.5 1.8 3890
YKK4006-8 220 740 29.2 92.9 0.78 0.8 5.5 1.8 3940
YKK4502-2 560 2975 66.4 94.4 0.86 0.6 7.0 1.8 4325
YKK4503-2 630 2975 73.7 94.6 0.87 0.6 7.0 1.8 4300
YKK4504-2 710 2975 82.9 94.7 0.87 0.6 7.0 1.8 4365
YKK4505-2 800 2975 93.3 94.8 0.87 0.6 7.0 1.8 4430
YKK4502-4 500 1485 59.5 94.0 0.86 0.7 6.5 1.8 4370
YKK4503-4 560 1485 66.5 94.2 0.86 0.7 6.5 1.8 4460
YKK4504-4 630 1485 74.7 94.4 0.86 0.7 6.5 1.8 4530
YKK4505-4 710 1485 84.0 94.6 0.86 0.7 6.5 1.8 4680
YKK4502-6 355 990 43.9 93.7 0.83 0.7 6.0 1.8 4300
YKK4503-6 400 990 49.4 93.8 0.83 0.7 6.0 1.8 4350
YKK4504-6 450 990 55.4 94.1 0.83 0.7 6.0 1.8 4470
YKK4505-6 500 990 61.5 94.3 0.83 0.7 6.0 1.8 4600
YKK4502-8 250 740 32.7 93.0 0.79 0.8 5.5 1.8 4110
YKK4503-8 280 740 36.6 93.2 0.79 0.8 5.5 1.8 4200
YKK4504-8 315 740 41.1 93.4 0.79 0.8 5.5 1.8 4330

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency EFFn(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK4505-8 355 740 46.2 93.5 0.79 0.8 5.5 1.8 4460
YKK4501-10 185 595 25.9 91.7 0.75 0.8 5.5 1.8 4080
YKK4502-10 200 595 27.9 91.9 0.75 0.8 5.5 1.8 4130
YKK4503-10 220 595 30.6 92.1 0.75 0.8 5.5 1.8 4210
YKK4504-10 250 595 34.8 92.3 0.75 0.8 5.5 1.8 4280
YKK4505-10 280 595 38.8 92.5 0.75 0.8 5.5 1.8 4520
YKK4504-12 185 495 27.7 91.8 0.70 0.8 5.5 1.8 4350
YKK4505-12 200 495 29.9 92.0 0.70 0.8 5.5 1.8 4370
YKK5001-2 900 2975 104.8 95.0 0.87 0.6 7.0 1.8 5310
YKK5002-2 1000 2975 116.3 95.1 0.87 0.6 7.0 1.8 5510
YKK5003-2 1120 2975 130.1 95.2 0.87 0.6 7.0 1.8 5710
YKK5004-2 1250 2975 145.1 95.3 0.87 0.6 7.0 1.8 5910
YKK5001-4 800 1485 93.3 94.8 0.87 0.7 6.5 1.8 5500
YKK5002-4 900 1485 104.9 94.9 0.87 0.7 6.5 1.8 5830
YKK5003-4 1000 1485 116.4 95.0 0.87 0.7 6.5 1.8 6025
YKK5004-4 1120 1485 130.3 95.1 0.87 0.7 6.5 1.8 6235
YKK5001-6 560 990 68.0 94.4 0.84 0.7 6.0 1.8 5515
YKK5002-6 630 990 76.4 94.5 0.84 0.7 6.0 1.8 5590
YKK5003-6 710 990 85.8 94.8 0.84 0.7 6.0 1.8 5810
YKK5004-6 800 990 96.6 94.9 0.84 0.7 6.0 1.8 6010
YKK5001-8 400 740 51.3 93.7 0.80 0.8 5.5 1.8 5265
YKK5002-8 450 740 57.7 93.8 0.80 0.8 5.5 1.8 5425
YKK5003-8 500 740 63.8 94.2 0.80 0.8 5.5 1.8 5605
YKK5004-8 560 740 71.4 94.4 0.80 0.8 5.5 1.8 5775
YKK5001-10 315 595 43.0 92.8 0.76 0.8 5.5 1.8 5280
YKK5002-10 355 595 48.3 93.0 0.76 0.8 5.5 1.8 5375
YKK500₃-10 400 595 54.3 93.3 0.76 0.8 5.5 1.8 5540
YKK5004-10 450 595 61.0 93.4 0.76 0.8 5.5 1.8 5700
YKK5001-12 220 495 31.9 92.2 0.72 0.8 5.5 1.8 5220
YKK5002-12 250 495 36.1 92.5 0.72 0.8 5.5 1.8 5395
YKK5003-12 280 495 40.4 92.7 0.72 0.8 5.5 1.8 5555
YKK5004-12 315 495 45.4 92.8 0.72 0.8 5.5 1.8 5815
YKK5601-2 1400 2975 160.5 95.4 0.88 0.6 7.0 1.8 6700
YKK5602-2 1600 2975 183.2 95.5 0.88 0.6 7.0 1.8 7100
YKK5603-2 1800 2975 205.9 95.6 0.88 0.6 7.0 1.8 7500
YKK5601-4 1250 1485 143.6 95.2 0.88 0.6 6.5 1.8 7150
YKK5602-4 1400 1485 160.6 95.3 0.88 0.6 6.5 1.8 8100
YKK5603-4 1600 1485 183.4 95.4 0.88 0.6 6.5 1.8 9050
YKK5601-6 900 990 107.3 95.0 0.85 0.7 6.5 1.8 7650
YKK5602-6 1000 990 119.0 95.1 0.85 0.7 6.5 1.8 7780
YKK5603-6 1120 990 133.2 95.2 0.85 0.7 6.5 1.8 7900

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency EFFn(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK5601-8 630 740 78.2 94.5 0.82 0.7 6.0 1.8 6850
YKK5602-8 710 740 88.1 94.6 0.82 0.7 6.0 1.8 7050
YKK5603-8 800 740 99.1 94.7 0.82 0.7 6.0 1.8 7300
YKK5601-10 500 595 65.9 93.6 0.78 0.7 6.0 1.8 5895
YKK5602-10 560 595 73.7 93.7 0.78 0.7 6.0 1.8 8100
YKK5603-10 630 595 82.9 93.8 0.78 0.7 6.0 1.8 8150
YKK5604-10 710 595 93.2 94.0 0.78 0.7 6.0 1.8 8300
YKK5601-12 355 495 49.6 93.0 0.74 0.7 6.0 1.8 6075
YKK5602-12 400 495 55.8 93.3 0.74 0.7 6.0 1.8 6200
YKK5603-12 450 495 62.7 93.4 0.74 0.7 6.0 1.8 7340
YKK5604-12 500 495 69.4 93.7 0.74 0.7 6.0 1.8 7620
YKK6301-2 2000 2975 228.5 95.7 0.88 0.6 7.0 1.8 9700
YKK6302-2 2240 2975 255.7 95.8 0.88 0.6 7.0 1.8 9800
YKK630₃-2 2500 2975 285.1 95.9 0.88 0.6 7.0 1.8 10020
YKK6301-4 1800 1485 206.1 95.5 0.88 0.6 6.5 1.8 11250
YKK6302-4 2000 1485 228.8 95.6 0.88 0.6 6.5 1.8 12220
YKK630₃-4 2240 1485 255.9 95.7 0.88 0.6 6.5 1.8 13100
YKK6301-6 1250 990 146.8 95.3 0.86 0.7 6.5 1.8 8730
YKK6302-6 1400 990 164.2 95.4 0.86 0.7 6.5 1.8 11250
YKK6303-6 1600 990 187.5 95.5 0.86 0.7 6.5 1.8 10250
YKK6301-8 900 740 108.8 94.8 0.84 0.7 6.0 1.8 8270
YKK6302-8 1000 740 120.7 94.9 0.84 0.7 6.0 1.8 8675
YKK6303-8 1120 740 135.1 95.0 0.84 0.7 6.0 1.8 9080
YKK6304-8 1250 740 150.6 95.1 0.84 0.7 6.0 1.8 9485
YKK6301-10 800 595 102.2 94.2 0.80 0.7 6.0 1.8 9250
YKK6302-10 900 595 114.8 94.3 0.80 0.7 6.0 1.8 9550
YKK6303-10 1000 595 127.4 94.4 0.80 0.7 6.0 1.8 9850
YKK6304-10 1120 595 142.4 94.6 0.80 0.7 6.0 1.8 10400
YKK6301-12 560 495 75.6 93.8 0.76 0.7 6.0 1.8 7900
YKK6302-12 630 495 84.9 93.9 0.76 0.7 6.0 1.8 10700
YKK6303-12 710 495 95.6 94.0 0.76 0.7 6.0 1.8 10980
YKK6304-12 800 495 107.5 94.2 0.76 0.7 6.0 1.8 11260
YKK7101-2 2800 2975 315.4 96.0 0.89 0.6 7.0 1.8 14370
YKK7102-2 3150 2975 354.4 96.1 0.89 0.6 7.0 1.8 14690
YKK7103-2 3550 2975 399.0 96.2 0.89 0.6 7.0 1.8 15230
YKK7104-2 4000 2975 449.1 96.3 0.89 0.6 7.0 1.8 15450
YKK7101-4 2500 1485 291.1 96.1 0.86 0.5 7.0 1.8 14870
YKK7102-4 2800 1485 325.7 96.2 0.86 0.5 7.0 1.8 15300
YKK7103-4 3150 1485 361.8 96.3 0.87 0.5 7.0 1.8 15500
YKK7104-4 3550 1485 407.7 96.3 0.87 0.5 7.0 1.8 15970
YKK7101-6 1800 985 212.7 95.8 0.85 0.5 7.0 1.8 14880

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency EFFη(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK7102-6 2000 985 236.1 95.9 0.85 0.5 7.0 1.8 15230
YKK7103-6 2240 985 264.2 96.0 0.85 0.5 7.0 1.8 15670
YKK7104-6 2500 985 294.5 96.1 0.85 0.5 7.0 1.8 15880
YKK7101-8 1400 740 168.5 95.2 0.84 0.6 7.0 1.8 14780
YKK7102-8 1600 740 192.3 95.3 0.84 0.6 7.0 1.8 15300
YKK7103-8 1800 740 216.1 95.4 0.84 0.6 7.0 1.8 15570
YKK7101-10 1250 595 152.9 94.8 0.83 0.6 6.5 1.8 15350
YKK7102-10 1400 595 171.0 94.9 0.83 0.6 6.5 1.8 15780
YKK7103-10 1600 595 195.3 95.0 0.83 0.6 6.5 1.8 15890
YKK7101-12 900 495 116.1 94.4 0.79 0.6 6.5 1.8 15420
YKK7102-12 1000 495 129.0 94.4 0.79 0.6 6.5 1.8 15750
YKK7103-12 1120 495 144.4 94.5 0.79 0.6 6.5 1.8 15980
YKK7101-16 500 365 71.0 92.8 0.73 0.6 6.5 1.8 15350
YKK7102-16 560 365 79.5 92.9 0.73 0.6 6.5 1.8 15600
YKK7103-16 630 365 89.3 93.0 0.73 0.6 6.5 1.8 15800
YKK7103-16 710 365 100.4 93.2 0.73 0.6 6.5 1.8 16000
YKK8001-2 4500 2975 504.7 96.4 0.89 0.6 7.0 1.8 16450
YKK8002-2 5000 2975 560.2 96.5 0.89 0.6 7.0 1.8 16700
YKK8003-2 5600 2975 626.8 96.6 0.89 0.6 7.0 1.8 17000
YKK8001-4 4000 1485 458.9 96.4 0.87 0.5 7.0 1.8 17250
YKK8002-4 4500 1485 516.3 96.4 0.87 0.5 7.0 1.8 17500
YKK800₃-4 5000 1485 573.1 96.5 0.87 0.5 7.0 1.8 17700
YKK8001-6 2800 990 326.0 96.1 0.86 0.5 7.0 1.8 16500
YKK8002-6 3150 990 366.4 96.2 0.86 0.5 7.0 1.8 16800
YKK8003-6 3550 990 412.9 96.2 0.86 0.5 7.0 1.8 17000
YKK8004-6 4000 990 464.8 96.3 0.86 0.5 7.0 1.8 17200
YKK8001-8 2000 740 237.1 95.5 0.85 0.6 7.0 1.8 17050
YKK8002-8 2240 740 265.3 95.6 0.85 0.6 7.0 1.8 17300
YKK8003-8 2500 740 295.7 95.7 0.85 0.6 7.0 1.8 17500
YKK8004-8 2800 740 330.9 95.8 0.85 0.6 7.0 1.8 17800
YKK8001-10 1800 595 219.4 95.1 0.83 0.6 6.5 1.8 16800
YKK8002-10 2000 595 243.6 95.2 0.83 0.6 6.5 1.8 17200
YKK800₃-10 2240 595 272.5 95.3 0.83 0.6 6.5 1.8 17500
YKK8001-12 1250 495 161.1 94.5 0.79 0.6 6.5 1.8 17210
YKK8002-12 1400 495 180.3 94.6 0.79 0.6 6.5 1.8 17500
YKK8003-12 1600 495 206.0 94.6 0.79 0.6 6.5 1.8 17800
YKK8004-12 1800 495 231.8 94.6 0.79 0.6 6.5 1.8 18000
YKK8001-16 800 365 113.0 93.3 0.73 0.6 6.5 1.8 17250
YKK8002-16 900 365 127.2 93.3 0.73 0.6 6.5 1.8 17620
YKK8003-16 1000 365 141.3 93.3 0.73 0.6 6.5 1.8 17800
YKK8004-16 1120 365 158.1 93.4 0.73 0.6 6.5 1.8 17950

Overall and installation dimensions (10KV)

YKK technical drawing
Technical data
Dimensions Number of poles Mounting dimensions (mm) Dimensions (mm)
A B C D E F G H K A.A. A.C. AB B.A. BB BD HD HB L
355 2 630 900 315 80 +0.030
+0.011		 170 22 71 355 28 160 994 800 540 1380 200 99 99 2150
355 4-6 630 900 315 100 +0.035
+0.013		 210 28 90 355 28 160 994 800 540 1380 200 99 99 2150
400 2 710 1000 375 90 170 25 81 400 35 210 1094 900 610 1520 230 109 109 2290
400 4-8 710 1000 335 110 210 28 100 400 35 210 1094 900 610 1520 230 109 109 2290
450 2 800 1120 400 100 210 28 90 450 35 210 1174 980 680 1640 230 149 149 2430
450 4 800 1120 355 120 210 32 109 450 35 210 1174 980 680 1640 230 149 149 2385
450 6-12 800 1120 355 130 +0.040
+0.015		 250 32 119 450 35 210 1174 980 680 1640 230 149 149 2425
500 2 900 1250 560 110 +0.035
+0.013		 210 28 100 500 42 210 1314 1120 720 1750 305 309 309 2630
500 4 900 1250 475 130 +0.040
+0.015		 250 32 119 500 42 210 1314 1120 720 1750 305 309 309 2600
500 6-12 900 1250 475 140 250 36 128 500 42 210 1314 1120 720 1750 305 309 309 2600
560 2 1000 1400 560 130 250 32 119 560 42 210 1410 1220 710 1880 340 387 387 2780
560 4 1000 1400 500 150 250 36 138 560 42 210 1410 1220 710 1880 340 387 387 2780
560 6-12 1000 1400 500 160 300 40 147 560 42 210 1410 1220 710 1880 340 387 387 2780
630 2 1120 1600 560 140 250 36 128 630 48 210 1620 1360 715 2020 300 507 507 3040
630 4 1120 1600 530 170 300 40 157 630 48 210 1620 1360 715 2020 300 507 507 2975
630 6-12 1120 1600 530 180 300 45 165 630 48 210 1620 1360 715 2020 300 507 507 2975
710 2 1400 1800 530 160 300 40 147 710 56 240 1860 1600 935 2270 235 507 507 3490
710 4-16 1400 1800 530 200 +0.046
+0.017		 350 45 185 710 56 240 1860 1600 935 2270 235 507 507 3550
800 2 1600 2000 530 180 +0.040
+0.015		 300 45 165 800 56 250 2110 1850 935 2520 260 605 605 3850
800 4-16 1600 2000 530 220 +0.046
+0.017		 350 50 203 800 56 250 2110 1850 935 2520 260 605 605 3900

Note: YKK560-2, YKK630-2, YKK710-2 and YKK800 motors are equipped with plain bearings.

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency EFFη(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight(kg)
YKK3551-2 220 2975 26.9 92.5 0.85 0.6 7.0 1.8 2470
YKK3552-2 250 2975 30.6 92.6 0.85 0.6 7.0 1.8 2700
YKK3553-2 280 2975 34.2 92.8 0.85 0.6 7.0 1.8 2730
YKK3554-2 315 2975 38.3 93.1 0.85 0.6 7.0 1.8 2750
YKK3551-4 185 1485 22.6 92.8 0.85 0.7 6.5 1.8 2280
YKK3552-4 200 1485 24.4 92.9 0.85 0.7 6.5 1.8 2325
YKK3553-4 220 1485 26.8 93.0 0.85 0.7 6.5 1.8 2390
YKK3554-4 250 1485 30.4 93.1 0.85 0.7 6.5 1.8 2450
YKK4002-2 355 2975 42.5 93.4 0.86 0.6 7.0 1.8 3540
YKK4003-2 400 2975 47.8 93.7 0.86 0.6 7.0 1.8 3570
YKK4004-2 450 2975 53.6 94.0 0.86 0.6 7.0 1.8 3590
YKK4005-2 500 2975 59.4 94.2 0.86 0.6 7.0 1.8 3620
YKK4002-4 280 1485 33.6 93.2 0.86 0.7 6.5 1.8 3780
YKK4003-4 315 1485 37.8 93.3 0.86 0.7 6.5 1.8 3845
YKK4004-4 355 1485 42.5 93.5 0.86 0.7 6.5 1.8 3925
YKK4005-4 400 1485 47.8 93.7 0.86 0.7 6.5 1.8 4050
YKK4006-4 450 1485 53.6 93.9 0.86 0.7 6.5 1.8 4160
YKK4001-6 185 990 23.5 92.4 0.82 0.7 6.0 1.8 2470
YKK4002-6 200 990 25.3 92.6 0.82 0.7 6.0 1.8 2520
YKK4003-6 220 990 27.8 92.8 0.82 0.7 6.0 1.8 3860
YKK4004-6 250 990 31.5 93.0 0.82 0.7 6.0 1.8 3900
YKK4005-6 280 990 35.2 93.3 0.82 0.7 6.0 1.8 3950
YKK4006-6 315 990 39.5 93.5 0.82 0.7 6.0 1.8 4060
YKK4004-8 185 740 24.7 92.5 0.78 0.8 5.5 1.8 3830
YKK4005-8 200 740 26.6 92.7 0.78 0.8 5.5 1.8 3890
YKK4006-8 220 740 29.2 92.9 0.78 0.8 5.5 1.8 3940
YKK450₂-2 560 2975 66.4 94.4 0.86 0.6 7.0 1.8 4325
YKK4503-2 630 2975 73.7 94.6 0.87 0.6 7.0 1.8 4300
YKK4504-2 710 2975 82.9 94.7 0.87 0.6 7.0 1.8 4365
YKK4505-2 800 2975 93.3 94.8 0.87 0.6 7.0 1.8 4430
YKK4502-4 500 1485 59.5 94.0 0.86 0.7 6.5 1.8 4370
YKK4503-4 560 1485 66.5 94.2 0.86 0.7 6.5 1.8 4460
YKK4504-4 630 1485 74.7 94.4 0.86 0.7 6.5 1.8 4530
YKK4505-4 710 1485 84.0 94.6 0.86 0.7 6.5 1.8 4680
YKK4502-6 355 990 43.9 93.7 0.83 0.7 6.0 1.8 4300
YKK4503-6 400 990 49.4 93.8 0.83 0.7 6.0 1.8 4350
YKK4504-6 450 990 55.4 94.1 0.83 0.7 6.0 1.8 4470
YKK4505-6 500 990 61.5 94.3 0.83 0.7 6.0 1.8 4600
YKK4502-8 250 740 32.7 93.0 0.79 0.8 5.5 1.8 4110
YKK4503-8 280 740 36.6 93.2 0.79 0.8 5.5 1.8 4200
YKK4504-8 315 740 41.1 93.4 0.79 0.8 5.5 1.8 4330

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency EFFη(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight(kg)
YKK4505-8 355 740 46.2 93.5 0.79 0.8 5.5 1.8 4460
YKK4501-10 185 595 25.9 91.7 0.75 0.8 5.5 1.8 4080
YKK4502-10 200 595 27.9 91.9 0.75 0.8 5.5 1.8 4130
YKK4503-10 220 595 30.6 92.1 0.75 0.8 5.5 1.8 4210
YKK4504-10 250 595 34.8 92.3 0.75 0.8 5.5 1.8 4280
YKK4505-10 280 595 38.8 92.5 0.75 0.8 5.5 1.8 4520
YKK4504-12 185 495 27.7 91.8 0.70 0.8 5.5 1.8 4350
YKK4505-12 200 495 29.9 92.0 0.70 0.8 5.5 1.8 4370
YKK5001-2 900 2975 104.8 95.0 0.87 0.6 7.0 1.8 5310
YKK5002-2 1000 2975 116.3 95.1 0.87 0.6 7.0 1.8 5510
YKK5003-2 1120 2975 130.1 95.2 0.87 0.6 7.0 1.8 5710
YKK5004-2 1250 2975 145.1 95.3 0.87 0.6 7.0 1.8 5910
YKK5001-4 800 1485 93.3 94.8 0.87 0.7 6.5 1.8 5500
YKK5002-4 900 1485 104.9 94.9 0.87 0.7 6.5 1.8 5830
YKK500₃-4 1000 1485 116.4 95.0 0.87 0.7 6.5 1.8 6025
YKK5004-4 1120 1485 130.3 95.1 0.87 0.7 6.5 1.8 6235
YKK5001-6 560 990 68.0 94.4 0.84 0.7 6.0 1.8 5515
YKK5002-6 630 990 76.4 94.5 0.84 0.7 6.0 1.8 5590
YKK5003-6 710 990 85.8 94.8 0.84 0.7 6.0 1.8 5810
YKK5004-6 800 990 96.6 94.9 0.84 0.7 6.0 1.8 6010
YKK5001-8 400 740 51.3 93.7 0.80 0.8 5.5 1.8 5265
YKK5002-8 450 740 57.7 93.8 0.80 0.8 5.5 1.8 5425
YKK5003-8 500 740 63.8 94.2 0.80 0.8 5.5 1.8 5605
YKK5004-8 560 740 71.4 94.4 0.80 0.8 5.5 1.8 5775
YKK5001-10 315 595 43.0 92.8 0.76 0.8 5.5 1.8 5280
YKK5002-10 355 595 48.3 93.0 0.76 0.8 5.5 1.8 5375
YKK5003-10 400 595 54.3 93.3 0.76 0.8 5.5 1.8 5540
YKK5004-10 450 595 61.0 93.4 0.76 0.8 5.5 1.8 5700
YKK5001-12 220 495 31.9 92.2 0.72 0.8 5.5 1.8 5220
YKK5002-12 250 495 36.1 92.5 0.72 0.8 5.5 1.8 5395
YKK5003-12 280 495 40.4 92.7 0.72 0.8 5.5 1.8 5555
YKK5004-12 315 495 45.4 92.8 0.72 0.8 5.5 1.8 5815
YKK5601-2 1400 2975 160.5 95.4 0.88 0.6 7.0 1.8 6700
YKK5602-2 1600 2975 183.2 95.5 0.88 0.6 7.0 1.8 7100
YKK5603-2 1800 2975 205.9 95.6 0.88 0.6 7.0 1.8 7500
YKK5601-4 1250 1485 143.6 95.2 0.88 0.6 6.5 1.8 7150
YKK5602-4 1400 1485 160.6 95.3 0.88 0.6 6.5 1.8 8100
YKK5603-4 1600 1485 183.4 95.4 0.88 0.6 6.5 1.8 9050
YKK5601-6 900 990 107.3 95.0 0.85 0.7 6.5 1.8 7650
YKK5602-6 1000 990 119.0 95.1 0.85 0.7 6.5 1.8 7780
YKK5603-6 1120 990 133.2 95.2 0.85 0.7 6.5 1.8 7900

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency η(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK5601-8 630 740 78.2 94.5 0.82 0.7 6.0 1.8 6850
YKK560₂-8 710 740 88.1 94.6 0.82 0.7 6.0 1.8 7050
YKK5603-8 800 740 99.1 94.7 0.82 0.7 6.0 1.8 7300
YKK5601-10 500 595 65.9 93.6 0.78 0.7 6.0 1.8 5895
YKK5602-10 560 595 73.7 93.7 0.78 0.7 6.0 1.8 8100
YKK5603-10 630 595 82.9 93.8 0.78 0.7 6.0 1.8 8150
YKK5604-10 710 595 93.2 94.0 0.78 0.7 6.0 1.8 8300
YKK5601-12 355 495 49.6 93.0 0.74 0.7 6.0 1.8 6075
YKK5602-12 400 495 55.8 93.3 0.74 0.7 6.0 1.8 6200
YKK5603-12 450 495 62.7 93.4 0.74 0.7 6.0 1.8 7340
YKK5604-12 500 495 69.4 93.7 0.74 0.7 6.0 1.8 7620
YKK6301-2 2000 2975 228.5 95.7 0.88 0.6 7.0 1.8 9700
YKK6302-2 2240 2975 255.7 95.8 0.88 0.6 7.0 1.8 9800
YKK6303-2 2500 2975 285.1 95.9 0.88 0.6 7.0 1.8 10020
YKK6301-4 1800 1485 206.1 95.5 0.88 0.6 6.5 1.8 11250
YKK6302-4 2000 1485 228.8 95.6 0.88 0.6 6.5 1.8 12220
YKK6303-4 2240 1485 255.9 95.7 0.88 0.6 6.5 1.8 13100
YKK6301-6 1250 990 146.8 95.3 0.86 0.7 6.5 1.8 8730
YKK630₂-6 1400 990 164.2 95.4 0.86 0.7 6.5 1.8 11250
YKK6303-6 1600 990 187.5 95.5 0.86 0.7 6.5 1.8 10250
YKK6301-8 900 740 108.8 94.8 0.84 0.7 6.0 1.8 8270
YKK6302-8 1000 740 120.7 94.9 0.84 0.7 6.0 1.8 8675
YKK6303-8 1120 740 135.1 95.0 0.84 0.7 6.0 1.8 9080
YKK6304-8 1250 740 150.6 95.1 0.84 0.7 6.0 1.8 9485
YKK6301-10 800 595 102.2 94.2 0.80 0.7 6.0 1.8 9250
YKK6302-10 900 595 114.8 94.3 0.80 0.7 6.0 1.8 9550
YKK6303-10 1000 595 127.4 94.4 0.80 0.7 6.0 1.8 9850
YKK6304-10 1120 595 142.4 94.6 0.80 0.7 6.0 1.8 10400
YKK6301-12 560 495 75.6 93.8 0.76 0.7 6.0 1.8 7900
YKK6302-12 630 495 84.9 93.9 0.76 0.7 6.0 1.8 10700
YKK6303-12 710 495 95.6 94.0 0.76 0.7 6.0 1.8 10980
YKK6304-12 800 495 107.5 94.2 0.76 0.7 6.0 1.8 11260
YKK7101-2 2800 2975 315.4 96.0 0.89 0.6 7.0 1.8 14370
YKK7102-2 3150 2975 354.4 96.1 0.89 0.6 7.0 1.8 14690
YKK7103-2 3550 2975 399.0 96.2 0.89 0.6 7.0 1.8 15230
YKK7104-2 4000 2975 449.1 96.3 0.89 0.6 7.0 1.8 15450
YKK7101-4 2500 1485 291.1 96.1 0.86 0.5 7.0 1.8 14870
YKK7102-4 2800 1485 325.7 96.2 0.86 0.5 7.0 1.8 15300
YKK7103-4 3150 1485 361.8 96.3 0.87 0.5 7.0 1.8 15500
YKK7104-4 3550 1485 407.7 96.3 0.87 0.5 7.0 1.8 15970
YKK7101-6 1800 985 212.7 95.8 0.85 0.5 7.0 1.8 14880

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency η(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK7102-6 2000 985 236.1 95.9 0.85 0.5 7.0 1.8 15230
YKK7103-6 2240 985 264.2 96.0 0.85 0.5 7.0 1.8 15670
YKK7104-6 2500 985 294.5 96.1 0.85 0.5 7.0 1.8 15880
YKK7101-8 1400 740 168.5 95.2 0.84 0.6 7.0 1.8 14780
YKK7102-8 1600 740 192.3 95.3 0.84 0.6 7.0 1.8 15300
YKK7103-8 1800 740 216.1 95.4 0.84 0.6 7.0 1.8 15570
YKK7101-10 1250 595 152.9 94.8 0.83 0.6 6.5 1.8 15350
YKK7102-10 1400 595 171.0 94.9 0.83 0.6 6.5 1.8 15780
YKK7103-10 1600 595 195.3 95.0 0.83 0.6 6.5 1.8 15890
YKK7101-12 900 495 116.1 94.4 0.79 0.6 6.5 1.8 15420
YKK7102-12 1000 495 129.0 94.4 0.79 0.6 6.5 1.8 15750
YKK7103-12 1120 495 144.4 94.5 0.79 0.6 6.5 1.8 15980
YKK7101-16 500 365 71.0 92.8 0.73 0.6 6.5 1.8 15350
YKK7102-16 560 365 79.5 92.9 0.73 0.6 6.5 1.8 15600
YKK7103-16 630 365 89.3 93.0 0.73 0.6 6.5 1.8 15800
YKK7103-16 710 365 100.4 93.2 0.73 0.6 6.5 1.8 16000
YKK8001-2 4500 2975 504.7 96.4 0.89 0.6 7.0 1.8 16450
YKK8002-2 5000 2975 560.2 96.5 0.89 0.6 7.0 1.8 16700
YKK8003-2 5600 2975 626.8 96.6 0.89 0.6 7.0 1.8 17000
YKK8001-4 4000 1485 458.9 96.4 0.87 0.5 7.0 1.8 17250
YKK8002-4 4500 1485 516.3 96.4 0.87 0.5 7.0 1.8 17500
YKK8003-4 5000 1485 573.1 96.5 0.87 0.5 7.0 1.8 17700
YKK8001-6 2800 990 326.0 96.1 0.86 0.5 7.0 1.8 16500
YKK8002-6 3150 990 366.4 96.2 0.86 0.5 7.0 1.8 16800
YKK8003-6 3550 990 412.9 96.2 0.86 0.5 7.0 1.8 17000
YKK8004-6 4000 990 464.8 96.3 0.86 0.5 7.0 1.8 17200
YKK8001-8 2000 740 237.1 95.5 0.85 0.6 7.0 1.8 17050
YKK8002-8 2240 740 265.3 95.6 0.85 0.6 7.0 1.8 17300
YKK800₃-8 2500 740 295.7 95.7 0.85 0.6 7.0 1.8 17500
YKK8004-8 2800 740 330.9 95.8 0.85 0.6 7.0 1.8 17800
YKK8001-10 1800 595 219.4 95.1 0.83 0.6 6.5 1.8 16800
YKK8002-10 2000 595 243.6 95.2 0.83 0.6 6.5 1.8 17200
YKK800₃-10 2240 595 272.5 95.3 0.83 0.6 6.5 1.8 17500
YKK8001-12 1250 495 161.1 94.5 0.79 0.6 6.5 1.8 17210
YKK8002-12 1400 495 180.3 94.6 0.79 0.6 6.5 1.8 17500
YKK8003-12 1600 495 206.0 94.6 0.79 0.6 6.5 1.8 17800
YKK8004-12 1800 495 231.8 94.6 0.79 0.6 6.5 1.8 18000
YKK8001-16 800 365 113.0 93.3 0.73 0.6 6.5 1.8 17250
YKK8002-16 900 365 127.2 93.3 0.73 0.6 6.5 1.8 17620
YKK8003-16 1000 365 141.3 93.3 0.73 0.6 6.5 1.8 17800
YKK8004-16 1120 365 158.1 93.4 0.73 0.6 6.5 1.8 17950

Overall and installation dimensions (10KV)

YKK technical drawing
Technical data
Dimensions Number of poles Mounting dimensions (mm) Dimensions (mm)
A B C D E F G H K A.A. A.C. AB B.A. BB BD HD HB L
450 2 800 1120 400 90 +0.035
+0.013		 210 25 81 450 35 210 1174 980 680 1640 230 1630 149 2390
450 4 800 1120 355 110 210 28 100 450 35 210 1174 980 680 1640 230 1630 149 2390
450 6 800 1120 355 110 210 28 100 450 35 210 1174 980 680 1640 230 1550 149 2390
500 2 900 1250 560 100 210 28 90 500 42 210 1314 1120 720 1750 305 1980 309 2645
500 4 900 1250 475 120 210 32 109 500 42 210 1314 1120 720 1750 305 1980 309 2560
500 6-10 900 1250 475 130 +0.040
+0.015		 250 32 119 500 42 210 1314 1120 720 1750 305 1780 309 2600
560 2 1000 1400 560 130 250 32 119 560 42 210 1410 1220 710 1880 340 2100 387 2780
560 4 1000 1400 500 150 250 36 138 560 42 210 1410 1220 710 1880 340 2100 387 2780
560 6-12 1000 1400 500 160 300 40 147 560 42 210 1410 1220 710 1880 340 1900 387 2780
630 2 1120 1600 560 140 250 36 128 630 48 210 1620 1360 715 2020 300 2250 507 3040
630 4 1120 1600 530 170 300 40 157 630 48 210 1620 1360 715 2020 300 2250 507 2975
630 6-12 1120 1600 530 180 300 45 165 630 48 210 1620 1360 715 2020 300 2250 507 2975
710 2 1400 1800 530 160 300 40 147 710 56 240 1860 1600 935 2270 235 2250 507 3490
710 4-16 1400 1800 530 200 +0.046
+0.017		 350 45 185 710 56 240 1860 1600 935 2270 235 2300 507 3550
800 2 1600 2000 530 180 +0.040 300 45 165 800 56 250 2110 1850 935 2520 260 2900 605 3850
+0.015
800 4-16 1600 2000 530 220 +0.046 350 50 203 800 56 250 2110 1850 935 2520 260 2950 605 3900
+0.017

Note: YKK560-2, YKK630-2, YKK710-2 and YKK800 motors are equipped with plain bearings.

Technical data

Technical data
Model Rated power (KW) Rated speed (r/min) Rated current (A) Efficiency η(%) Power factor cosφ Starting torque Nominal torque Starting current Rated current Maximum torque Nominal torque Weight (kg)
YKK4501-2 220 2975 15.7 92.7 0.87 0.6 7.0 1.8 3100
YKK4502-2 250 2975 17.9 92.8 0.87 0.6 7.0 1.8 3300
YKK450₃-2 280 2975 20.0 92.9 0.87 0.6 7.0 1.8 3500
YKK4504-2 315 2975 22.4 93.2 0.87 0.6 7.0 1.8 3800
YKK4505-2 355 2975 25.2 93.5 0.87 0.6 7.0 1.8 3850
YKK4506-2 400 2975 28.3 93.8 0.87 0.6 7.0 1.8 3950
YKK4507-2 450 2975 31.8 94.0 0.87 0.6 7.0 1.8 4050
YKK450₈-2 500 2975 35.3 94.1 0.87 0.6 7.0 1.8 4300
YKK4501-4 220 1485 16.0 92.5 0.86 0.7 7.0 1.8 3540
YKK4502-4 250 1485 18.1 92.6 0.86 0.7 7.0 1.8 3770
YKK4503-4 280 1485 20.3 92.7 0.86 0.7 7.0 1.8 3870
YKK4504-4 315 1485 22.8 92.9 0.86 0.7 7.0 1.8 3900
YKK4505-4 355 1485 25.6 93.1 0.86 0.7 7.0 1.8 4210
YKK4506-4 400 1485 28.8 93.3 0.86 0.7 7.0 1.8 4310
YKK4507-4 450 1485 32.2 93.7 0.86 0.7 7.0 1.8 4500
YKK450₈-4 500 1485 35.8 93.8 0.86 0.7 7.0 1.8 4920
YKK4504-6 220 990 16.8 92.1 0.82 0.7 6.0 1.8 4100
YKK4505-6 250 990 19.1 92.2 0.82 0.7 6.0 1.8 4220
YKK4506-6 280 990 21.3 92.4 0.82 0.7 6.0 1.8 4430
YKK4507-6 315 990 24.0 92.6 0.82 0.7 6.0 1.8 4570
YKK450₈-6 355 990 26.6 92.9 0.83 0.7 6.0 1.8 4600
YKK5004-2 560 2975 39.4 94.3 0.87 0.6 7.0 1.8 5770
YKK5005-2 630 2975 44.3 94.4 0.87 0.6 7.0 1.8 5910
YKK5006-2 710 2975 49.3 94.5 0.88 0.6 7.0 1.8 6050
YKK5007-2 800 2975 55.5 94.6 0.88 0.6 7.0 1.8 6300
YKK500₈-2 900 2975 62.4 94.7 0.88 0.6 7.0 1.8 6450
YKK5004-4 560 1485 40.0 94.0 0.86 0.7 7.0 1.8 5670
YKK5005-4 630 1485 44.9 94.2 0.86 0.7 7.0 1.8 5860
YKK5006-4 710 1485 49.7 94.8 0.87 0.7 7.0 1.8 6040
YKK5007-4 800 1485 55.9 94.9 0.87 0.7 7.0 1.8 6070
YKK5008-4 900 1485 62.2 95.0 0.88 0.7 7.0 1.8 6630
YKK5004-6 400 990 29.9 93.1 0.83 0.7 6.0 1.8 5450
YKK5005-6 450 990 33.6 93.3 0.83 0.7 6.0 1.8 5710
YKK5006-6 500 990 37.1 93.7 0.83 0.7 6.0 1.8 5890
YKK5007-6 560 990 41.0 93.9 0.84 0.7 6.0 1.8 6120
YKK500₈-6 630 990 46.0 94.2 0.84 0.7 6.0 1.8 6680
YKK5002-8 220 740 18.1 92.1 0.76 0.7 6.0 1.8 5250
YKK5003-8 250 740 20.6 92.2 0.76 0.7 6.0 1.8 5440
YKK5004-8 280 740 23.0 92.4 0.76 0.7 6.0 1.8 5670
YKK5005-8 315 740 25.5 92.6 0.77 0.7 6.0 1.8 5710
YKK5006-8 355 740 28.7 92.9 0.77 0.7 6.0 1.8 5770
YKK5007-8 400 740 31.8 93.0 0.78 0.7 6.0 1.8 5830
YKK5008-8 450 740 35.7 93.2 0.78 0.7 6.0 1.8 6370
YKK5005-10 220 595 19.0 91.8 0.73 0.7 5.5 1.8 5770
YKK5006-10 250 595 21.5 92.0 0.73 0.7 5.5 1.8 5940
YKK5007-10 280 595 23.7 92.2 0.74 0.7 5.5 1.8 6130

Mounting design

Mounting design
Horizontal version on feet Flange version Foot-mounted version with flange Vertical version on feet
YKK technical drawing

Connection diagram

YKK technical drawing

Technical data (10KV)

Connection diagram
Designation Firstnumeral Second numeral
Protection from the penetration of solid foreign bodies and from human contact with live or moving parts located inside. Water protection
5. The penetration of dust is not completely excluded, but its amount is not enough to disrupt the normal operation of the engine. Avoid touching or approaching live and rotating parts inside the enclosure. 5. Jets of water from any direction must not have any harmful effect on the engine.
6. The penetration of dust into the shell is completely prevented. Touching live or moving parts inside the enclosure is completely prevented. 6. Strong jets of water should not have any harmful effects on the engine.
IP55 Dustproof Protection against jets of water
IP56 Dustproof Protection against strong jets of water
IP65 Dustproof Protection against jets of water
IP66 Dustproof Protection against strong jets of water

Labeling example

YKK technical drawing

Bearings

Labeling example
Dimensions Drive side Non-drive side
2P 4,6,8P 2P 4,6,8P 2P 4,6,8P
YX3 and derivative series YE2 and derivative series YX3 and derivative series YE2 and derivative series YX3 and derivative series YE2 and derivative series
80 180204KZ2 180204KZ2
90 180205KZ2 180205KZ2
100 180206KZ2 180206KZ2
112 180206KZ2 180206KZ2 180206KZ2 180206KZ2 180206KZ2 180206KZ2
132 180208KZ2 180208KZ2 180208KZ2 180208KZ2 180208KZ2 180208KZ2
160 309-ZV2 180309KZ2 309-ZV2 180309KZ2 309-ZV2 180309KZ2
180 311-ZV2 311-ZV2 311-ZV2 311-ZV2 311-ZV2 311-ZV2
200 312-ZV2 312-ZV2 312-ZV2 312-ZV2 312-ZV2 312-ZV2
225 313-ZV2 312-ZV2 313-ZV2 313-ZV2 313-ZV2 312-ZV2
250 314-ZV2 313-ZV2 314-ZV2 314-ZV2 314-ZV2 314-ZV2
280 314-ZV2 314-ZV2 317-ZV2 317-ZV2 314-ZV2 317-ZV2 317-ZV2
315 317-ZV2 317-ZV2 319-ZV2 319-ZV2 317-ZV2 319-ZV2 317-ZV2 319-ZV2
355 319-ZV2 319-ZV2 2322-ZV2 2322-ZV2 322-ZV2 319-ZV2 322-ZV2

Vibration

The root mean square vibration velocity of the engine at idle does not exceed the class N values given in the table. At customer's request, it is possible to manufacture according to class R.

Labeling example
Dimensions ≤132 >132~225 >225~355
Synchronous speed 600~1800 >1800~3600 600~1800 >1800~3600 600~1800 >1800~3600
Vibration class RMS vibration velocity mm/s
N 1.8 2.8
R 0.71 1.12 1.12 1.8 1.8 2.8
S 0.45 0.71 0.71 1.12 1.12 1.8

Ordering information

This catalog is for reference only. Specific details are subject to change without notice.

When ordering, please indicate the model, power, voltage, speed, insulation class, degree of protection, installation design and other nominal data of the required product.

The following engines can be designed and manufactured according to customer requirements:

1. Motors with different voltages, frequencies and powers;

2. Motors with different insulation classes and degrees of protection;

3. Motors with terminals on the left, two ends of the shaft or a special shaft;

4. Motors for high or low temperatures;

5. Engines for high altitude and outdoor installation;

6. Engines of increased power and with various service factors;

7. Motors with heaters, temperature measurement of bearings and windings, thermal protection switches;

8. Motors with photoelectric encoders, insulated bearings or insulated bearing structure;

9. Engines with other special requirements.

DAXING MOTOR

Let's discuss your request for electric motors

Send request

WeChat

WeChat Contact QR CodeOpen original
Original

Privacy Policy

Thank you for using this site (“we”, “us” or “our”). We respect your rights and interests in personal information, comply with the principles of legality, legitimacy, necessity and integrity, and protect your information security. This policy describes how we process your personal information.

1. Collection of information
Information you provide voluntarily, such as name, mobile number, email address, etc., is completed during registration. Information such as device model, browser type, access logs, IP address, etc. is automatically collected to optimize service and security.

2. Use of information
provide, maintain and optimize website services;
account verification, security protection and fraud prevention;
Send necessary information such as service notifications and policy updates;
Comply with laws, regulations and applicable regulatory requirements.

3. Protection and exchange of information
We use security measures such as encryption and access controls to protect your information and only store it for the minimum period necessary to complete the task.
Do not sell or rent personal information to third parties without your consent; Share only if:
Get your explicit permission;
third parties entrusted to provide services (subject to confidentiality obligations);
Respond to legal requests or protect legitimate interests.

4. Your rights
You have the right to access, correct and supplement your personal information, and you can also apply to cancel your account (after cancellation, the information will be deleted or anonymized according to the rules). To exercise your rights, you may contact us using the contact details provided below.

5. Policy Updates
Any changes to this policy will be notified by posting on the site. Your continued use of the services means your acceptance of the amended rules.