Трёхфазные асинхронные электродвигатели IE4

Product overview

Three-phase asynchronous electric motors of the IE4 series comply with the first efficiency class according to GB 18613-2012 “Minimum permissible values and energy efficiency classes of small and medium-sized three-phase asynchronous electric motors”, as well as energy efficiency class IE4 according to IEC 60034-30-1:2014.

The enhanced efficiency design meets government requirements for energy conservation and reduction of energy consumption in the manufacturing industry.

The mounting dimensions of IE4 motors comply with IEC 60034. The motors feature rational design, attractive appearance, high efficiency, low noise levels and high protection and insulation classes. Can be used to drive fans, pumps, machine tools, compressors, transport mechanisms and other general purpose equipment, as well as in more severe conditions in the oil, chemical, steel and mining industries.

Detailed description

Operating conditions

IE4 motors are suitable for most conditions and applications. Standard operating conditions: temperature from −15°C to +40°C, altitude 1000 m above sea level.

Heating and insulation

The motor is designed with Class 155(F) insulation; Temperature rise is rated Class B (80K), which ensures engine life and reliability.

Cooling and ventilation

Standard cooling is fully enclosed, self-ventilated (TEFC). The standard motor is equipped with a plastic fan. The design complies with IC411 according to IEC 60034-6.

Degree of protection

Motor protection degree - IP55; Operation in dusty or damp environments is allowed. At customer's request, motors with a higher degree of protection can be supplied.

Motor protection

Temperature monitoring and winding and bearing protection devices, including PTC and PT100, can be installed upon request.

Voltage and frequency

Standard power supply is 380V/50HZ. It is possible to design motors at 50Hz with any voltage in the range of 200–660V. The engine remains operational when the supply voltage deviates from the nominal value by ±5%.

Quality Assurance

From design to production, ISO9001 quality management system procedures are strictly followed.

Technical data

2 poles -Synchronous speed 3000r/min50HZ

2pole-3000rpm synchronous speed 50HZ

Technical data
Model	Rated power ratedoutputKW	Rated speed ratedspeedrpm	Rated current IFL380VA	Rated current IFL400VA	Rated current IFL415VA	Rated current IFL525VA	Efficiency EFF%	Power factor powerfactorcosq	Nominal torque ratedtorqueN.m	Starting torque Nominal torque TST/TFL	Maximum torque Nominal torque TM/TFL	Inrush current Rated current IST/IFL	Moment of inertia MofIkgm2	Noise noiselevelLWdB(A)	Weight netweightkg
IE4-80M1-2	0.75	2855	1.6	1.5	1.5	1.2	84.9%	0.83	2.5	2.3	2.3	6.8	0.001	62	19
IE4-80M2-2	1.1	2855	2.3	2.2	2.1	1.7	86.7%	0.83	3.7	2.3	2.3	7.1	0.002	62	20
IE4-90S-2	1.5	2875	3.1	2.9	2.8	2.2	87.5%	0.85	5.0	2.3	2.3	7.3	0.002	67	23
IE4-90L-2	2.2	2875	4.4	4.1	4.0	3.2	89.1%	0.86	7.3	2.3	2.3	7.6	0.003	67	32
IE4-100L-2	3	2880	5.8	5.5	5.3	4.2	89.7%	0.87	9.9	2.2	2.3	7.8	0.006	74	45
IE4-112M-2	4	2900	7.6	7.3	7.0	5.5	90.3%	0.88	13.2	2.2	2.3	8.1	0.009	77	50
IE4-132S1-2	5.5	2900	10.4	9.9	9.5	7.5	91.5%	0.88	18.1	2.2	2.3	8.2	0.024	79	85
IE4-132S2-2	7.5	2900	13.9	13.2	12.7	10.1	92.1%	0.89	24.7	2.2	2.3	7.8	0.029	79	91
IE4-160M1-2	11	2940	20.2	19.2	18.5	14.6	93.0%	0.89	35.7	2.2	2.3	7.9	0.067	81	134
IE4-160M2-2	15	2940	27.4	26.0	25.1	19.8	93.4%	0.89	48.7	2.2	2.3	7.9	0.080	81	150
IE4-160L-2	18.5	2940	33.7	32.0	30.8	24.4	93.8%	0.89	60.1	2.2	2.3	8	0.097	81	170
IE4-180M-2	22	2955	39.8	37.8	36.4	28.8	94.4%	0.89	71.1	2.2	2.3	8.1	0.137	83	244
IE4-200L1-2	30	2965	54.2	51.5	49.6	39.2	94.5%	0.89	96.6	2	2.3	7.5	0.227	84	329
IE4-200L2-2	37	2965	66.6	63.3	61.0	48.2	94.8%	0.89	119.2	2	2.3	7.5	0.269	84	345
IE4-225M-2	45	2970	80.8	76.7	74.0	58.5	95.1%	0.89	144.7	2.2	2.3	8.8	0.360	86	436
IE4-250M-2	55	2975	98.4	93.5	90.1	71.2	95.4%	0.89	176.6	2.2	2.3	7.5	0.791	89	546
IE4-280S-2	75	2975	133.9	127.2	122.6	96.9	95.6%	0.89	240.8	1.8	2.3	6.9	0.960	91	681
IE4-280M-2	90	2975	160.4	152.4	146.9	116.1	95.8%	0.89	288.9	1.8	2.3	6.9	1.157	91	731
IE4-315S-2	110	2980	193.4	183.8	177.1	140.0	96.0%	0.9	352.5	1.8	2.2	7	1.662	92	1296
IE4-315M-2	132	2980	232.1	220.5	212.6	168.0	96.0%	0.9	423.0	1.8	2.2	7	1.874	92	1369
IE4-315L1-2	160	2980	280.8	266.7	257.1	203.2	96.2%	0.9	512.8	1.8	2.2	7.1	2.146	92	1463
IE4-315L-2	185	2980	321.1	305.0	294.0	232.4	96.2%	0.91	592.9	1.8	2.2	7.1	2.481	92	1539
IE4-315L2-2	200	2980	346.8	329.4	317.5	251.0	96.3%	0.91	640.9	1.8	2.2	7.1	2.448	92	1544
IE4-355M1-2	220	2980	381.4	362.4	349.3	276.1	96.3%	0.91	705.0	1.6	2.2	7.1	3.8	100	1720
IE4-355M2-2	250	2980	433.0	411.4	396.5	313.4	96.4%	0.91	801.2	1.6	2.2	7.1	4.4	100	1830
IE4-355L1-2	280	2980	485.0	460.7	444.1	351.0	96.4%	0.91	897.3	1.6	2.2	7.2	4.8	100	1960
IE4-355L2-2	315	2980	545.0	517.8	499.1	394.5	96.5%	0.91	1009.5	1.6	2.2	7.2	5.0	100	2160
IE4-3551-2	355	2980	620.4	589.4	568.1	449.1	96.6%	0.9	1137.6	1.6	2.2	7.2	5.6	104	2280
IE4-3552-2	400	2980	699.1	664.1	640.1	506.0	96.6%	0.9	1201.7	1.6	2.2	7.2	5.9	104	2360

B3 Overall and installation dimensions

IE4-80~132

IE4-160~200

IE4-225~280

IE4-315~355

B3 Overall and installation dimensions

B3 Overall and installation dimensions
Dimensions	Number of poles	A	A.A.	AB	A.C.	AD'	A.G.	B	BB	C	D	DH*	E	ED	F	G	G.D.	H	H.A.	HD	K	KK	L*	LG
80M	2-8	125	34	165	175	145	51	100	142	50	19	M6X16	40	22	6	15.5	6	80	10	235	10	M24X1.5	301	115
90S	2-8	140	36	180	205	155	60	100	180	56	24	M8X19	50	32	8	20	7	90	12.5	260	10	M24X1.5	360	129
90L	2-8	140	36	180	205	155	60	125	210	56	24	M8X19	50	32	8	20	7	90	12.5	260	10	M24X1.5	390	129
100L	2-8	160	40	205	215	165	60	140	233	63	28	M10X22	60	40	8	24	7	100	14	275	12	M24X1.5	433.5	147
112M	2-8	190	45	230	236	185	75	140	252	70	28	M10X22	60	40	8	24	7	112	14	307	12	M30X2	461	144
132S	2-8	216	52	270	275	215	75	140	242	89	38	M12X28	80	56	10	33	8	132	16	347	12	M30X2	477	250
132M	2-8	216	52	270	275	215	75	178	242	89	38	M12X28	80	56	10	33	8	132	16	347	12	M30X2	515	250
160M	2-8	254	67	320	340	255	95	210	305	108	42	M16X36	110	80	12	37	8	160	19	430	14.5	M36X2	656.5	270
160L	2-8	254	67	320	340	255	95	254	375	108	42	M16X36	110	80	12	37	8	160	19	430	14.5	M36X2	728.5	270
180M	2-8	279	70	345	385	300	120	241	420	121	48	M16x36	110	80	14	42.5	9	180	22	480	14.5	M48x2	818	288
180L	2-8	279	70	345	385	300	120	279	420	121	48	M16x36	110	80	14	42.5	9	180	22	480	14.5	M48x2	818	288
200L	2-8	318	70	390	440	325	120	305	490	133	55	M20x42	110	80	16	49	10	200	25	525	18.5	M48x2	908.5	298
225S	4-8	356	75	435	490	370	160	286	475	149	60	M20x42	140	100	18	53	11	225	28	595	18.5	M64x2	958	350
225M	2	356	75	435	490	370	160	311	475	149	55	M20x42	110	80	16	49	10	225	28	595	18.5	M64x2	928	320
225M	4-8	356	75	435	490	370	160	311	475	149	60	M20x42	140	100	18	53	11	225	28	595	18.5	M64x2	958	350
250M	2	406	80	485	545	390	160	349	515	168	60	M20x42	140	100	18	53	11	250	33	645	24	M64x2	981	350
250M	4-8	406	80	485	545	390	160	349	515	168	65	M20x42	140	100	18	58	11	250	33	645	24	M64×2	981	350
280S	2	457	85	550	610	415	160	368	554	190	65	M20x42	140	100	18	58	11	280	35	700	24	M64×2	1028	350
280S	4-8	457	85	550	610	415	160	368	554	190	75	M20x42	140	100	20	67.5	12	280	35	700	24	M64x2	1042	350
280M	2	457	85	550	610	415	160	419	554	190	65	M20x42	140	100	18	58	11	280	35	700	24	M64×2	1028	350
280M	4-8	457	85	550	610	415	160	419	554	190	75	M20x42	140	100	20	67.5	12	280	35	700	24	M64×2	1042	350
315S	2	508	120	635	670	600	260	406	790	216	65	M20x42	140	100	18	58	11	315	35	920	28	M72x2	1419	387
315M	2	508	120	635	670	600	260	457	790	216	65	M20x42	140	100	18	58	11	315	35	920	28	M72x2	1419	387
315L	2	508	120	635	670	600	260	508	790	216	65	M20x42	140	100	18	58	11	315	35	920	28	M72x2	1419	387
315S	4-8	508	120	635	670	600	260	406	790	216	80	M20x42	170	130	22	71	14	315	35	920	28	M72×2	1492	417
315M	4-8	508	120	635	670	600	260	457	790	216	80	M20x42	170	130	22	71	14	315	35	920	28	M72x2	1492	417
315L	4-8	508	120	635	670	600	260	508	790	216	80	M20x42	170	130	22	71	14	315	35	920	28	M72×2	1492	417
355M	2	610	125	735	735	640	260	560	775	254	75	M24X50	140	110	20	67.5	12	355	49	1000	28	M72x2	1490	415
355L	2	610	125	735	735	640	260	630	775	254	75	M24X50	140	110	20	67.5	12	355	49	1000	28	M72x2	1490	415
355M	4-8	610	125	735	735	640	260	560	775	254	95	M24X50	170	140	25	86	14	355	49	1000	28	M72x2	1520	445
355L	4-8	610	125	735	735	640	260	630	775	254	95	M24X50	170	140	25	86	14	355	49	1000	28	M72x2	1520	445
355L extended	2	610	125	735	735	640	260	630	875	254	75	M24X50	140	110	20	67.5	12	355	49	1000	28	M72x2	1590	415
355L extended	4-8	610	125	735	735	640	260	630	875	254	95	M24X50	170	140	25	86	14	355	49	1000	28	M72x2	1620	445

Note:

1. In the drawing, DH defaults to denote the center hole without thread; If necessary, threading can be done.
2. Tolerance of size L for dimensions 80–132 - ±5; for dimensions 160–355 - +8.

B35 Overall and installation dimensions

IE4-80~132

IE4-160~200

IE4-225~280

IE4-315~355

B35 Overall and installation dimensions

B35 Overall and installation dimensions
Dimensions	Number of poles	A	A.A.	AB	A.C.	AD'	A.G.	B	BB	C	D	D.H.	E	ED	F	G	G.D.	H	H.A.	HD	K	L	L.A.	LG	M	N	P	S	T	KK
80M	2-8	125	34	165	175	145	51	100	142	50	19	M6X16	40	22	6	15.5	6	80	10	235	10	301	14	115	165	130	200	12	3.5	M24X1.5
90S	2-8	140	36	180	205	155	60	100	180	56	24	M8X19	50	32	8	20	7	90	12.5	260	10	360	12	129	165	130	200	12	3.5	M24X1.5
90L	2-8	140	36	180	205	155	60	125	210	56	24	M8X19	50	32	8	20	7	90	12.5	260	10	390	12	129	165	130	200	12	3.5	M24X1.5
100L	2-8	160	40	205	215	165	60	140	233	63	28	M10X22	60	40	8	24	7	100	14	275	12	433.5	14	147	215	180	250	14.5	4	M24X1.5
112M	2-8	190	45	230	236	185	75	140	252	70	28	M10X22	60	40	8	24	7	112	14	307	12	461	12	144	215	180	250	14.5	4	M30X2
132S	2-8	216	52	270	275	215	75	140	242	89	38	M12X28	80	56	10	33	8	132	16	347	12	477	14	250	265	230	300	14.5	4	M30X2
132M	2-8	216	52	270	275	215	75	178	242	89	38	M12X28	80	56	10	33	8	132	16	347	12	515	14	250	265	230	300	14.5	4	M30X2
160M	2-8	254	67	320	340	255	95	210	305	108	42	M16X36	110	80	12	37	8	160	19	430	14.5	656.5	15	270	300	250	350	18.5	5	M36X2
160L	2-8	254	67	320	340	255	95	254	375	108	42	M16X36	110	80	12	37	8	160	19	430	14.5	728.5	15	270	300	250	350	18.5	5	M36X2
180M	2-8	279	70	345	385	300	120	241	420	121	48	M16x36	110	80	14	42.5	9	180	22	480	14.5	818	15	288	300	250	350	18.5	5	M48x2
180L	2-8	279	70	345	385	300	120	279	420	121	48	M16x36	110	80	14	42.5	9	180	22	480	14.5	818	15	288	300	250	350	18.5	5	M48x2
200L	2-8	318	70	390	440	325	120	305	490	133	55	M20x42	110	80	16	49	10	200	25	525	18.5	908.5	17	298	350	300	400	18.5	5	M48x2
225S	4-8	356	75	435	490	370	160	286	475	149	60	M20x42	140	100	18	53	11	225	28	595	18.5	958	19	350	400	350	450	18.5	5	M64x2
225M	2	356	75	435	490	370	160	31	475	149	55	M20x42	110	80	16	49	10	225	28	595	18.5	928	19	320	400	350	450	18.5	5	M64x2
225M	4-8	356	75	435	490	370	160	31	475	149	60	M20x42	140	100	18	53	11	225	28	595	18.5	958	19	350	400	350	450	18.5	5	M64x2
250M	2	406	80	485	545	390	160	349	515	168	60	M20x42	140	100	18	53	11	250	33	645	24	981	22	350	500	450	550	18.5	5	M64x2
250M	4-8	406	80	485!	545	390	160	349	515	168	65	M20x42	140	100	18	58	11	250	33	645	24	981	22	350	500	450	550	18.5	5	M64x2
280S	2	457	85	550	610	415	160	368	554	190	65	M20x42	140	100	18	58	11	280	35	700	24	1028	22	350	500	450	550	18.5	5	M64x2
280S	4-8	457	85	550	610	415	160	368	554	190	75	M20x42	140	100	20	67.5	12	280	35	700	24	1042	22	350	500	450	550	18.5	5	M64x2
280M	2	457	85	550	610	415	160	419	554	190	65	M20x42	140	100	18	58	11	280	35	700	24	1028	22	350	500	450	550	18.5	5	M64x2
280M	4-8	457	85	550	610	415	160	419	554	190	75	M20x42	140	100	20	67.5	12	280	35	700	24	1042	22	350	500	450	550	18.5	5	M64x2
315S	2	508	120	635	670	600	260	406	790	216	65	M20x42	140	100	18	58	11	315	35	920	28	1419	24	387	600	550	660	24	6	M72x2
315M	2	508	120	635	670	600	260	457	790	216	65	M20x42	140	100	18	58	11	315	35	920	28	1419	24	387	600	550	660	24	6	M72x2
315L	2	508	120	635	670	600	260	508	790	216	65	M20x42	140	100	18	58	11	315	35	920	28	1419	24	387	600	550	660	24	6	M72x2
315S	4-8	508	120	635	670	600	260	406	790	216	80	M20x42	170	130	22	71	14	315	35	920	28	1492	24	417	600	550	660	24	6	M72x2
315M	4-8	508	120	635	670	600	260	457	790	216	80	M20x42	170	130	22	71	14	315	35	920	28	1492	24	417	600	550	660	24	6	M72x2
315L	4-8	508	120	635	670	600	260	508	790	216	80	M20x42	170	130	22	71	14	315	35	920	28	1492	24	417	600	550	660	24	6	M72x2
355M	2	610	125	735	735	640	260	560	775	254	75	M24X50	140	110	20	67.5	12	355	49	1000	28	1490	25	415	740	680	800	24	6	M72X2
355L	2	610	125	735	735	640	260	630	775	254	75	M24X50	140	110	20	67.5	12	355	49	1000	28	1490	25	415	740	680	800	24	6	M72X2
355M	4-8	610	125	735	735	640	260	560	775	254	95	M24X50	170	140	25	86	14	355	49	1000	28	1520	25	445	740	680	800	24	6	M72X2
355L	4-8	610	125	735	735	640	260	630	775	254	95	M24X50	170	140	25	86	14	355	49	1000	28	1520	25	445	740	680	800	24	6	M72X2
355L extended	2	610	125	735	735	640	260	630	875	254	75	M24X50	140	110	20	67.5	12	355	49	1000	28	1590	25	415	740	680	800	24	6	M72X2
355L extended	4-8	610	125	735	735	640	260	630	875	254	95	M24X50	170	140	25	86	14	355	49	1000	28	1620	25	445	740	680	800	24	6	M72X2

Note:

1. All values of dimension R in the drawing are equal to 0.

2. In the drawing, DH defaults to denote the center hole without thread; If necessary, threading can be done.

3. Tolerance of size L for dimensions 80–132 - ±5; for dimensions 160–355 - +8.

B5&V1 Overall and installation dimensions

B5&V1 Overall and installation dimensions
Dimensions	Number of poles	A.C.	D	AD	AD'	A.G.	D.H.	E	ED	F	G	G.D.	L.A.	LG	M	N	P	S	T	KK	L	L.M.
80M	2-8	175	19	155	145	51	M6X16	40	22	6	15.5	6	14	115	165	130	200	12	3.5	M24X1.5	301	–
90S	2-8	205	24	170	155	60	M8X19	50	32	8	20	7	12	129	165	130	200	12	3.5	M24X1.5	360	–
90L	2-8	205	24	170	155	60	M8X19	50	32	8	20	7	12	129	165	130	200	12	3.5	M24X1.5	390	–
100L	2-8	215	28	175	165	60	M10X22	60	40	8	24	7	14	147	215	180	250	14.5	4	M24X1.5	433.5	–
112M	2-8	236	28	195	185	75	M10X22	60	40	8	24	7	12	144	215	180	250	14.5	4	M30X2	461	–
132S	2-8	275	38	215	215	75	M12X28	80	56	10	33	8	14	250	265	230	300	14.5	4	M30X2	477	–
132M	2-8	275	38	215	215	75	M12X28	80	56	10	33	8	14	250	265	230	300	14.5	4	M30X2	515	–
160M	2-8	340	42	270	255	95	M16X36	110	80	12	37	8	15	270	300	250	350	18.5	5	M36X2	656.5	701.5
160L	2-8	340	42	270	255	95	M16X36	110	80	12	37	8	15	270	300	250	350	18.5	5	M36X2	728.5	723.5
180M	2-8	385	48	300	300	120	M16x36	110	80	14	42.5	9	15	288	300	250	350	18.5	5	M48x2	818	863
180L	2-8	385	48	300	300	120	M16x36	110	80	14	42.5	9	15	288	300	250	350	18.5	5	M48x2	818	863
200L	2-8	440	55	325	325	120	M20x42	110	80	16	49	10	17	298	350	300	400	18.5	5	M48x2	908.5	984
225S	4-8	490	60	370	370	160	M20x42	140	100	18	53	11	19	350	400	350	450	18.5	5	M64×2	958	1033
225M	2	490	55	370	370	160	M20x42	110	80	16	49	10	19	320	400	350	450	18.5	5	M64x2	928	1003
225M	4-8	490	60	370	370	160	M20x42	140	100	18	53	11	19	350	400	350	450	18.5	5	M64x2	958	1033
250M	2	545	60	390	390	160	M20x42	140	100	18	53	11	22	350	500	450	550	18.5	5	M64x2	981	1056
250M	4-8	545	65	390	390	160	M20x42	140	100	18	58	11	22	350	500	450	550	18.5	5	M64x2	981	1056
280S	2	610	65	415	415	160	M20x42	140	100	18	58	11	22	350	500	450	550	18.5	5	M64x2	1028	1113
280S	4-8	610	75	415	415	160	M20x42	140	100	20	67.5	12	22	350	500	450	550	18.5	5	M64x2	1042	1127
280M	2	610	65	415	415	160	M20x42	140	100	18	58	11	22	350	500	450	550	18.5	5	M64x2	1028	1113
280M	4-8	610	75	415	415	160	M20x42	140	100	20	67.5	12	22	350	500	450	550	18.5	5	M64x2	1042	1127
315S	2	670	65	600	600	260	M20x42	140	100	18	58	11	24	387	600	550	660	24	6	M72x2	1419	1504
315M	2	670	65	600	600	260	M20x42	140	100	18	58	11	24	387	600	550	660	24	6	M72x2	1419	1504
315L	2	670	65	600	600	260	M20x42	140	100	18	58	11	24	387	600	550	660	24	6	M72x2	1419	1504
315S	4-8	670	80	600	600	260	M20x42	170	130	22	71	14	24	417	600	550	660	24	6	M72x2	1492	1577
315M	4-8	670	80	600	600	260	M20x42	170	130	22	71	14	24	417	600	550	660	24	6	M72x2	1492	1577
315L	4-8	670	80	600	600	260	M20x42	170	130	22	71	14	24	417	600	550	660	24	6	M72x2	1492	1577
355M(V1)	2	735	75	645	640	260	M24X50	140	110	20	67.5	12	25	415	740	680	800	24	6	M72X2	1490	1590
355L(V1)	2	735	75	645	640	260	M24X50	140	110	20	67.5	12	25	415	740	680	800	24	6	M72X2	1490	1590
355M(V1)	4-8	735	95	645	640	260	M24X50	170	140	25	86	14	25	445	740	680	800	24	6	M72X2	1520	1620
355L(V1)	4-8	735	95	645	640	260	M24X50	170	140	25	86	14	25	445	740	680	800	24	6	M72X2	1520	1620
355L extended	2	735	75	645	640	260	M24X50	140	110	20	67.5	12	25	415	740	680	800	24	6	M72X2	1590	1690
355L extended	4-8	735	95	645	640	260	M24X50	170	140	25	86	14	25	445	740	680	800	24	6	M72X2	1620	1720

Note:

1. All values of dimension R in the drawing are equal to 0.

2. In the drawing, DH defaults to denote the center hole without thread; If necessary, threading can be done.
3. Tolerance of dimensions L and LM for dimensions 80–132 - ±5; for dimensions 160–355 - +8.

35512 Overall and installation dimensions

IE4-35512~B3

IE4-35512~B35

IE4-35512~V1

35512 Overall and installation dimensions
Dimensions	Number of poles	A	A.A.	AB	A.C.	AD'	B1	B2	BB	C	D	D.H.	E	ED	F	G	G.D.	H	H.A.	HD	K	L.A.	L	L.M.	LG	M	N	P	S	T	KK
35512	2	630	140	760	760	630	630	800	1110	224	80	M20X42	170	140	22	71	14	355	49	950	35	28	1850	1950	545	840	780	900	24	6	M72*2
35512	4-8	630	140	760	760	630	630	800	1110	224	110	M24X50	210	160	28	100	16	355	49	950	35	28	1940	2040	585	840	780	900	24	6	M72*2

Note:

1. In the drawing, DH defaults to denote the center hole without thread; If necessary, threading can be done.

2. Tolerance of dimensions L and LM in the drawing is +8.

Terminal box with top terminal

35512 Overall and installation dimensions
Dimensions	A	B	C	1	2	3	4	5	Thread size	Inlet diameter (dia.)
IE4-80	105	105	65	M5X16	M5X25	M5X16	M5X12	M4	M24X1.5	φ11
IE4-90～100	113	113	72	M5X16	M5X25	M5X16	M5X12	M4	M24X1.5	φ11
IE4-112～132	121	129	80	M5X16	M5X25	M5X20	M5X16	M5	2XM30X2	2Xφ15
IE4-160	163	173	92	M5X16	M6X25	M6X16	M6X12	M6	2XM36X2	2Xφ25
IE4-180～200	188	208	107	M8x25	M8x35	M8x25	M8x16	M8	2XM48x2	2X36
IE4-225～280	217	246	120	M8x25	M8x35	M8x25	M8x16	M10	2XM64x2	2Xφ51
IE4-315～355	350	475	285	M12X30	M12X80	M12X30	M10X25	M20	2XM72X2	2X52

Terminal box with side outlet

35512 Overall and installation dimensions
Frame size	A	B	C	1	2	3	4	5	Thread size GlandSize	Inlet diameter (dia.)
IE4-80	95	95	56	M5X16	M5X25	M5X16	M5X12	M4	M24X1.5	φ11
IE4-90～100	105	109	56	M5X16	M5X25	M5X16	M5X12	M4	M24X1.5	φ11
IE4-112～132	117	125	65	M5X16	M5X25	M5X20	M5X16	M5	2XM30X2	2Xφ15
IE4-160	155	177	87	M5X16	M6X25	M6X16	M6X12	M6	2XM36X2	2X25
IE4-180～200	176	212	107	M6X20	M8X35	M8X20	M8X16	M8	2XM48X2	2Xφ36
IE4-225～280	212	248	115	M6X20	M8X35	M8X30	M8x16	M10	2XM64x2	2X51
IE4-315～355	340	410	275	M8x30	M12x40	M12x30	M10×25	M20	2XM72x2	2Xφ52

Bearings and seals

Bearing data

Bearings and seals
Engine model	Drive side DE	Non-drive side NDE	d	D	B
IE4-80	6204ZZ	6204ZZ	20	47	14
IE4-90	6205ZZ	6205ZZ	25	52	15
IE4-100	6206ZZ	6206ZZ	30	62	16
IE4-112	6306ZZ	6306ZZ	30	72	19
IE4-132	6308ZZ	6308ZZ	40	90	23
IE4-160	6309	6309	45	100	25
IE4-180	6311	6311	55	120	29
IE4-200	6312	6312	60	130	31
IE4-225	6313	6313	65	140	33
IE4-250	6314	6314	70	150	35
IE4-2802P	6314	6314	70	150	35
IE4-2804-6P	6317	6317	85	180	41
IE4-3152P	6316	6316	80	170	39
IE4-3154-6P	6319	6319	95	200	45
IE4-355(2P)(B3.B35)	6319	6319	95	200	45
IE4-355(2P)V1	6319	7319	95	200	45
IE4-355(4-8P)(B3,B35)	6322	6322	110	240	50
IE4-355(4-8P)V1	6322	7322	110	240	50
IE4-35512(2P)(B3,B35)	6319/C3	6319/C3	95	200	45
IE4-35512(4-8P)(B3,B35)	NU324	6324	120	260	55
IE4-35512(2P)V1	6319C3	7319	95	200	45
IE4-35512(4-8P)V1	NU324	7324	110	260	55

Bearing data

Shaft seal data

Bearings and seals
Engine Model MotorType	Oil Seal Size	d	D	h	H
IE4-80	RB20x35x4.0	φ20	φ35	3	6
IE4-90	RB25x40x4.0	φ25	φ40	3	6
IE4-100	RB30x47x4.5	φ30	φ47	3.5	6.5
IE4-112	RB30x47x4.5	φ30	φ47	3.5	6.5
IE4-132	RB40x57x4.5	φ40	φ57	3.5	6.5
IE4-160	RB45x62x4.5	φ45	φ62	3.5	6.5
IE4-180	RB55x75x5.5	φ55	φ75	4.5	6.5
IE4-200	RB60x80x5.5	φ60	φ80	4.5	6.5
IE4-225	RB65×85×5.5	φ65	φ85	4.5	8
IE4-250	RB70x90x5.5	φ70	φ90	4.5	8
IE4-280-2	RB70x90x5.5	φ70	φ90	4.5	8
IE4-280-4.6.8	RB85x105x5.5	Φ85	φ105	4.5	8
IE4-315-2	RB80x100×5.5	φ80	φ100	4.5	8
IE4-315-4.6.8	RB95x115x5.5	φ95	φ115	4.5	8

Oil seal data

Three-phase asynchronous motors IE4

Product overview